Easy to install, reposition, and remove
Enjoy the ease of working with this repositionable adhesive-back fabric that is easy to install, reposition, and remove with virtually no residue. The special adhesive is designed to stick to non-porous surfaces to create seamless, photographic image quality wall and floor graphics.
Made with recycled water bottles2 and coating materials
HP Recycled<sup1 Removable Adheisve Fabric is made with recycled water bottles2 and coating materials. Recycling beverage containers (and other materials) saves energy, reduces greenhouse gas emissions, and diverts material from landfills.3
Grab attention with vibrant image quality for a variety of applications
Capture realistic graphic detail for applications from wall murals and event signage to retail displays. Achieve a high-quality look with this versatile, easy-to-handle, repositionable self-adhesive fabric—ideal for a wide range of indoor and outdoor applications.
|Print service providers
|Designed for easy installation, repositioning, and removal for a wide range of applications
|Ability to contour cut and apply without stretching
|Indoor and short-term outdoor signage
|Smooth, matte finish for deep blacks, vivid colors and high ink saturation
|Outstanding photographic image quality
|Trade show graphics
|B1, ASTM E84 flame resistance4
|Compatible with Original HP Bright Office Inks, HP Vivid Photo Inks, HP PageWide XL pigment inks, and HP Latex Inks
|Slip-resistant5 for floor graphics6
|Compatible with HP Bright Office Inks, HP Vivid Photo Inks, HP PageWide XL pigment inks, and HP Latex Inks
|Weight (With liner)
|289 g/m² per ISO 536 Test Method
|Thickness (With liner)
|304 microns/12 mil per ISO 20534 Test Method
|120 g/m², double-sided PE-coated silicone paper
|Clear, removable, and repositionable adhesive
|Up to 3 years removable/repositionable indoors
|>85% per TAPPI T-425 Test Method and ISO 2471 Test Method
|>97 per Tappi-T452 Test Method
|118 per ASTM E313-98 Test Method
|In compliance according to ANSI A137.1/A326.3 and AS HB198:2014 (AS/NZS 4586)5
|15 to 25° C / 59 to 77° F
|20 to 80% RH
|Moderately water resistant7
|Print side out
|3-in core with a removable 2-in core adapter
|B1, and ASTM E84 approved fire certifications4
|For additional protection, liquid or spray coatings are recommended8
|HP PageWide XL cutter
|The weight of this material is higher than the recommended weight limit for the HP PageWide XL cutter, which may reduce the expected life of the cutter
|1 year, unopened in original packaging
|10 to 27° C / 50 to 80° F
|35 to 65% RH
|Adhesive fabric made with recycled water bottles2 and coating materials, REACH compliant9
|Use a carbide knife for kiss and die-cutting
|To install the graphic, peel 101 millimeters (4 inches) of the release liner off the graphic and place on wall or surface. Continue to peel back 101 millimeters (4 inches) of the liner incrementally while mounting.
|Country of origin
|Product of China
HP large format printing materials are free from defects in materials and workmanship. For warranty statement, please see HPLFMedia.com/en/mediawarranties. To obtain warranty service, please contact BMG customer support at HPLFMedia.com/hp/en/contactus.
1Product consists of PET fabric and coatings. With liner attached, 72% by weight of the product consists of recycled content. Base material fabric is made from 100% recycled resin.
2100% of total PET resin in the product made from recycled water bottles. The coating does not contain recycled materials. Compliant with Global Recycled Standard (GRS) Version 4.0.
3According to “The Ecology of Recycling,” published on the United Nations website, UN Chronicle, see un.org/en/chronicle/article/ecology-recycling and “Reducing and Reusing Basics,” US EPA, March 2022, see https://www.epa.gov/recycle/reducing-and-reusing-basics.
4B1, ASTM E84 approved fire certifications.
5Slip resistance for dry environments based on testing by Sotter Engineering Corporation, February 2022, in compliance according to ANSI A137.1/A326.3 and AS HB198:2014 (AS/NZS 4586).
6Recommended on indoor smooth, non-porous, sealed flat and dry surfaces for up to 3 months. Slip resistance for dry environments based on testing by Sotter Engineering Corporation, February 2022, in compliance according to ANSI A137.1/A326.3 and AS HB198:2014 (AS/NZS 4586).
7Performance varies based on printer and print profile. Water resistance testing by HP Image Permanence Lab on a range of HP media and follows ISO 18935 method. For more information, see HPLFMedia.com/hp/printpermanence.
8For additional protection, we recommend Marabu ClearShield Professional Wall Armor.
9See the HP REACH Declaration published at HP Printing Products and Consumable Supplies.